How to Use a Nail Gun with an Air Compressor

There are many different types of nail guns on the market. Some of them operate with the use of electricity while others are pneumatic. Most of these nailers use compressed air to power them. A nail gun can be used for many different activities; nailing furniture, cars, and even artwork. This article will teach you how to use a nail gun with Air compressor.

Nail guns are an excellent tool to have within your tools. If you’re a skilled artist or simply need to replace some tiles on your roof, a nail gun will assist you in getting the task accomplished.

An air compressor is a device that creates pressurized air. The energy generated by this pressurized air can then be utilized to power a variety of tools. In this blog, I’ll show you how to set up and operate an air compressor that is portable and a pneumatic nail gun.

There are various nail guns you can use, However, the pneumatic nail gun is your best choice: they make use of air pressure to push nails into the ground, aside from some additional noise, they’re extremely durable. These nail guns run on air compressors and should you not know how to get the two work in tandem, check out this guide to ensure the task will take less than half of the normal duration and effort.

Using a Nail Gun with an Air Compressor

Before you start you’ll require the nail gun as well as an air hose as well as the air compressor.

Step 1: Select the Type of Nail Gun to Use

The kind that nail guns you’re using depends upon the type of work you’re performing:

Finish Nail Gun

Finish nail guns utilize larger nail gauges (15-16 gauge) and are best nail gun to fix old furniture and other diy projects. They can be used on wood or any other surface.

Framing Nail Gun

For larger projects like redoing your deck on the patio or constructing the old shed for tools using a framing nail gun can be the best choice. It utilizes 2.8mm nails that can be applied to wood without breaking them or damaging plaster that is on top.

Brad Nail Gun

Brad nail guns make use of small nail heads (18-23 gauge) and are suitable to work on small objects, for example, fixing a nightstand or child’s toy since the screw heads aren’t too large or obvious.

Step 2: Select Nails for Your Nail Gun (Nailer)

Nails used in nail guns are typically joined with wires, paper, or even a tiny amount of adhesive. When you fire the gun, the heat of the gun splits the nail from its attachment and pushes it into the substrate. Nails with adhesive are much better on the substrate when the adhesive has cooled and is set.

The majority of DIY and other DIY projects at home require round-headed nails (or D-shape) (clipped nail clips). The primary distinction between them is that nail guns can hold between 20 and 30 percent more clipped nails due to their design, as in contrast to round-headed nails.

Alos Read: How to Use an Air Compressor on Your Flat Tire

Another distinction could be that the clipped nail is generally tied with paper, whereas round nails are bound to plastic. The choice is dependent on your personal taste and the kind of nails are available in your area.

Step 3: Choose Your Compressor

Compressors could be gas or electric-powered. Electric compressors are more suitable to use in homes because they do not emit gas and smoke.

Compressors can be mobile or run via cables. It all depends on the type of job you’ll be using it for. If you’re putting it on nail guns, any choice is acceptable, however when you’re using the same compressor for refilling the tire that is flat and you’re traveling, a portable model is preferred.

Step 4: Connect Your Air Compressor to Your Nail Gun

If you’ve purchased an air compressor brand new then you’ll have to put it all together before. Make use of pliers to hold the rubber stopper as well as the wheels to ensure they are in the correct position. After fixing the coupler in place then fix the nail gun onto the exposed side of your air hose. When the two have been connected the connecting wire will feel firm and full. Make sure that the compressor is filled with the correct amount of oil, and you’ll be all set to begin.

Step 5: Safety First

Before starting work begin work, don the safety glasses and, ideally, a hard cap to shield yourself from falling dust or damage resulting from equipment that is not properly managed.

Do not make any adjustments or try to remove your nail gun as soon as after or while using it.

Avoid working using a nail gun that is connected with an air compressor within an area that can cause sparks of electricity.

Step 6: Start Working

Switch on your air compressor and then wait for the pressure to increase within the tank. The range of pressures for an air compressor for personal use is between 100 and 110 PSI. Set the pressure based on how deep you’d like to drive the nails. For nails that are completely sunken, you’ll require a greater pressure than if you’re trying to put the nails back in the correct position. Make sure not to push the compressor beyond the limit of pressure.

The nozzle of the nail gun is fully against the surface, and then fire to push the nail into. This will help avoid situations where nails might bounce off the surface and hurt the person who is using them.

Step 7: Finishing Off

The nail gun is the final item that you’ll have to disconnect. In the event that you’re sure that the air compressor isn’t completely shut off, treat the nail gun as though it’s loaded even if it’s not.

After you’ve finished, don’t switch off the compressor immediately. Reduce the pressure slowly using the regulator to lower. When you’ve reached the limit turn it off and then open the safety valve, which will release any air remaining. Close the drain valve of the compressor to let out the remaining air too (this will stop the accumulation of rust within the compressor).

Remove the nail gun from the air hose and wash the nail gun by using oil. After the tools have cooled off completely, you can put them away. them.

Safety Measure to Consider While Working

If, at any time, the gun seems stuck, switch off the air compressor as well as the nail gun completely prior to checking whether the nails are jammed.

If you think that your nails aren’t the right ones for the job Stop, look over the situation and alter the nails, if needed.

Utilize work lamps to avoid any accidents caused by darkness. Naturally, it is not a secret that you shouldn’t shoot your nail gun at any animal, person or part of the body. Make sure you have a warning signal when you are working in case you need to.

When you know how to make use of an air compressor along with the nail guns almost any task becomes simpler. If it's a simple task like fixing two wooden boards which are loose from your wooden floor, there's no require an expert. You can simply turn on with your nails and repair the problem yourself. Even things like creating a treehouse for your kids will not take much time or effort. Air compressors will take care of the job of driving nails for you.

Leave a Comment